Simms G3 Guide Tactical Jacket

Shadow Green

Your problems may all fade away the second your line hits the water, but the storm around you will rage on. Protect yourself like a pro from the elements with Simms' G3 Guide Tactical Waterproof Jacket. Durable, lightweight three-layer GORE-TEX with water-tight cuffs provide a waterproof seal that keeps you dry even while tailing or releasing your catch of the day. Stash every piece of tackle in your arsenal, and warm your hands while you are at it, in seven convenient pockets and two micro-fleece lined hand pockets. The packable Storm Hood adjusts to fight the fiercest downpour.



9 pockets: 4 zippered chest pockets, 2 zippered hand pockets, 1 zippered sleeve pocket, 1 internal zippered pocket, 1 internal stretch mesh pocket
    YKK water resistant zippers
    4 point adjustable, tuck away Storm Hood
    Watertight Shingle Cuff
    2 integrated retractors, 1 fly patch, 1 net D ring
    Hem closure
    FABRIC TECH:3 layer GORE TEX 100% nylon face
    APPROX. WEIGHT:20 oz.

    The GORE-TEX membrane is the heart of all GORE -TEX products. The GORE-TEX membrane contains 9 billion microscopic pores per square inch. These pores are so small that water droplets cannot get through but water vapor can still escape. Water from the outside cannot penetrate and cold winds cannot pass through, but perspiration can escape easily, keeping you dry and comfortable all day. GORE-TEX fabrics are created by integrating the GORE-TEX membrane between an outer fabric and lining.

    All Simms outerwear features nylon YKK zippers to minimize corrosion and provide high performing, durable wear.


    Cleaning your GORE-TEX garments regularly will extend the life of the product. It will also keep them breathable as dirt and oil can clog the GORE-TEX membrane over time.

    It is critical to wash jackets. Natural oils can damage the GORE-TEX tape and adhesives causing a peeling effect.

    Machine wash warm. Do not use fabric softener or bleach.

    Remember to zip all pockets and close all Velcro cuffs before washing to prevent any damage caused by the machine.

    Tumble dry on warm setting making sure not to use a high heat setting. Drying on warm will actually reactivate the DWR coating.